137 of 137 terms
A rotating bezel marked with a 12-hour scale. It can track a second time zone using the watch's regular hour hand.
#components
How closely a watch keeps time compared with a reference. It is often expressed as seconds gained or lost per day or month.
#performance-and-ratings
A watch cover made from transparent plastic. It scratches relatively easily, but light surface marks can often be polished away.
#materials
Replacement or accessory parts supplied by a third party rather than the watch's original manufacturer. They can affect originality, fit, and collector value.
#collecting-and-trade
The angle, measured in degrees, through which a balance wheel swings from its resting position to one extreme. Watchmakers use it to help assess movement condition.
#performance-and-ratings
A display that shows time using hands moving against a scale or dial. It can be powered by a mechanical or quartz movement.
#functions-and-operation
The beveling and polishing of edges on movement parts, especially plates and bridges.
#techniques
A calendar complication that distinguishes between 30-day and 31-day months. It requires manual correction at the end of February.
#complications
A thin coating applied to one or both sides of a watch crystal to reduce reflections and improve dial visibility.
#techniques
Separate hour markers attached to the dial rather than printed onto it. They add depth and may take the form of batons, numerals, or other shapes.
#components
Short for atmosphere, a pressure unit used in watch water-resistance ratings. A depth equivalent on a rating describes test pressure rather than a guaranteed usable diving depth.
#performance-and-ratings
A mechanical watch movement that winds itself using the natural motion of the wearer's wrist.
#movements
A rotating component that oscillates back and forth to regulate the timekeeping of a mechanical watch.
#components
A pressure unit commonly used to state water resistance. One bar is approximately atmospheric pressure at sea level and roughly the additional pressure from 10 meters of water.
#performance-and-ratings
A cylindrical housing containing the mainspring. In most mechanical watches, its toothed edge drives the gear train as the spring unwinds.
#components
The frequency at which a mechanical movement's balance oscillates, often expressed in vibrations per hour. Each vibration represents one half of a full oscillation.
#performance-and-ratings
The ring surrounding a watch's crystal, which may be fixed or rotating and can serve various functions.
#components
A bezel that rotates both clockwise and counterclockwise, allowing quick adjustment in either direction.
#components
A watch band made from connected links, commonly metal or ceramic. It is usually secured with a clasp and sized by adjusting or removing links.
#straps-and-bracelets
A supporting part secured to the mainplate that holds movement components in position, often supporting the pivots of rotating wheels.
#components
A surface-finishing technique that creates fine directional lines. It gives metal a softer, less reflective appearance than polishing.
#techniques
The specific movement or mechanism that powers a watch, often identified by a manufacturer's reference number.
#movements
A GMT watch with an independently adjustable 24-hour hand. It is convenient for tracking another time zone while keeping the main hands on local time.
#functions-and-operation
The protective housing that holds the movement and dial. Together with the crystal, caseback, and seals, it helps protect the watch's interior.
#components
The width of a watch case, usually measured across a round case in millimeters and excluding the crown. It is a common guide to watch size.
#general-horology
The height of a watch from the caseback to the top of the crystal, usually measured in millimeters. It affects how high the watch sits on the wrist.
#general-horology
The rear cover of a watch case. It may be solid or include a transparent window showing the movement.
#components
A hard, nonmetallic material used for components such as cases and bezel inserts. It resists scratches but can chip or fracture under impact.
#materials
A ring or marked band around the dial carrying a scale, often for hours, minutes, or seconds.
#components
A watch complication that functions as a stopwatch, allowing the measurement of elapsed time.
#complications
A watch or movement that has passed specific accuracy tests and received certification from an authorized testing body.
#performance-and-ratings
A rotating component with raised columns that coordinates a chronograph's start, stop, and reset controls.
#components
Any function of a mechanical watch beyond displaying hours, minutes, and seconds, such as a date display or moon phase.
#complications
A rotating bezel with a scale that increases clockwise, commonly from zero to 60 minutes. Aligning its zero marker with the minute hand lets you read elapsed time.
#components
A rotating bezel with a scale that decreases clockwise toward zero. Set the desired interval beside the minute hand to track the time remaining.
#components
A small knob on the side of a watch used to set the time, adjust functions, and wind the movement.
#components
The transparent cover that protects the watch dial, typically made from sapphire, mineral glass, or acrylic.
#components
An opening in the dial that shows the date of the month, usually from a numbered disc beneath it.
#complications
A calendar display that shows both the day of the week and the date of the month.
#complications
The removal of unwanted magnetism from watch components using a demagnetizing device. Magnetized mechanical parts can disrupt timekeeping.
#care-and-servicing
A folding clasp that opens to let a watch pass over the hand while keeping the strap or bracelet connected.
#straps-and-bracelets
The face of a watch that displays the time through hands, markers, numerals, or other indicators.
#components
A display that shows time directly as numerals rather than through the position of hands. It is usually electronic, though mechanical versions also exist.
#functions-and-operation
A watch designed for underwater diving, with water resistance, a readable display, and a way to monitor dive time. A dive-style appearance alone does not establish diving suitability.
#watch-types
A diamond-like carbon coating used to create a hard, wear-resistant surface on watch components. It commonly gives cases and bracelets a dark finish.
#techniques
A watch designed to complement formal clothing, typically with a slim case and a restrained dial.
#watch-types
A dial decorated with a glass-like coating formed by firing powdered enamel onto a base, usually metal. Traditional fired enamel differs from paint or lacquer marketed with enamel-like descriptions.
#techniques
The part at either end of a bracelet that connects it to the watch case, often shaped to fit between the lugs.
#straps-and-bracelets
A mechanism that controls the release of energy from the mainspring and regulates the movement of a mechanical watch.
#components
A caseback with a transparent window that lets the wearer see the movement. It is also called a display caseback.
#components
A practical, easy-to-read watch style rooted in military use, usually featuring clear numerals and a durable case.
#watch-types
A bezel that does not rotate. It may be decorative or carry a scale, such as a tachymeter.
#components
A bezel with a repeating pattern of ridges and grooves around its surface. The pattern is often used as a decorative design detail.
#components
A chronograph that can be reset and restarted instantly with a single push of a button while running.
#complications
A watch offered with its original accompanying items, typically its box and papers. The exact contents vary, so the seller's inventory should specify what is included.
#collecting-and-trade
A seal fitted around openings such as the caseback, crown, or crystal to help keep water and dust out.
#components
A series of meshing wheels and pinions that transmits motion through a watch movement.
#components
A watch function that displays a second time zone, typically using an additional hour hand.
#complications
A bezel marked with a 24-hour scale, read using a GMT hand. A rotating version can shift the displayed time zone without adjusting that hand.
#components
A decorative technique that creates intricate, repeating geometric patterns on watch dials and movement components.
#techniques
A feature that stops the seconds hand when the crown is pulled out, allowing precise time synchronization.
#functions-and-operation
A fine spiral spring attached to the balance wheel. It provides the restoring force that keeps the wheel oscillating.
#components
Pointers that move over a dial to indicate time or other information, such as a second time zone or power reserve.
#components
A chronograph coupling that moves a wheel sideways into engagement with the chronograph train. It is also called a lateral clutch.
#components
The study and science of measuring time, including the art and craft of making clocks and watches.
#general-horology
Numerals, dots, or other symbols that identify hour positions on a dial. They may be printed, applied, or coated with luminous material.
#components
A movement described as developed and produced by the watch brand itself rather than sourced as a complete movement. The extent of outside sourcing varies between brands.
#movements
A bracelet designed to merge directly into a watch case through a model-specific connection. Fitting a conventional strap often requires a special adapter.
#straps-and-bracelets
A rotating timing ring beneath the crystal, typically operated by a separate crown.
#components
Synthetic ruby or sapphire bearings used in watch movements to reduce friction and wear between moving components.
#components
In travel-time watches, an hour hand that can be adjusted in one-hour steps without moving the minute hand. This differs from a jumping-hour display, which changes its hour indication instantly as time passes.
#functions-and-operation
The distance between the inside faces of a watch's lugs, usually measured in millimeters. It determines the strap or bracelet width needed at the attachment point.
#straps-and-bracelets
The distance from the tip of one lug to the opposite lug along the length of the case. It helps indicate how much wrist space a watch will occupy.
#general-horology
The extensions of a watch case that connect the watch to its strap or bracelet.
#components
Luminous material applied to hands, markers, or other details to make them readable in darkness.
#materials
A watch's ability to withstand magnetic fields while limiting their effect on timekeeping. Protection may come from shielding or components made from materials less affected by magnetism.
#performance-and-ratings
The principal supporting plate of a watch movement. It holds many components in position and provides mounting points for bridges.
#components
A tightly coiled spring that stores and releases the energy needed to power a mechanical watch.
#components
A mechanical movement system that relies on turning the crown by hand to wind the mainspring.
#movements
In watchmaking, a company that produces its own movements rather than simply casing purchased movements. It may still source some components from specialist suppliers.
#general-horology
A movement powered by a mainspring and regulated by a mechanical oscillator, typically a balance wheel and hairspring. It can be manually wound or automatic.
#movements
A small automatic winding weight recessed into the movement rather than sitting above it. This arrangement can help reduce movement thickness.
#components
A feature that changes a bracelet's fit in small increments without removing links. Depending on the clasp, adjustment may require a tool or be possible by hand.
#straps-and-bracelets
A watch cover made from mineral glass, often hardened for durability. It generally resists scratches better than acrylic but less well than sapphire.
#materials
A complication that sounds the time on demand using small hammers and gongs. It typically chimes the hours, quarter-hours, and remaining minutes.
#complications
A watch complication that displays the current phase of the Moon as it progresses through its lunar cycle.
#complications
The surface treatments and final detailing applied to movement parts. These can serve practical purposes, such as removing burrs, as well as decorative ones.
#techniques
Older stock described as unused and left unsold since its original retail period. An unworn watch can still show storage wear or need servicing because of its age.
#collecting-and-trade
A dial with an opening that reveals part of the movement, usually the oscillating balance wheel. Most of the movement remains covered, unlike a fully skeletonized design.
#components
Changes in a watch's color or surface appearance that develop with age and exposure. Patina can be desirable to collectors, but it does not by itself establish originality or good condition.
#collecting-and-trade
A decorative finish formed from overlapping circular marks, often applied to movement plates and bridges.
#techniques
A calendar complication that automatically accounts for varying month lengths and leap years, typically until a specified calendar exception.
#complications
A watch designed for aviation use or inspired by aviation instruments. Common features include a highly legible dial and controls that are easy to operate.
#watch-types
A strap fastener with a hinged pin that passes through a sizing hole. It works like a traditional belt buckle.
#straps-and-bracelets
A watch designed to be carried in a pocket rather than worn on the wrist, often attached to a chain.
#watch-types
The amount of time a mechanical watch can continue running before its stored energy is exhausted.
#performance-and-ratings
A display showing how much running time or stored energy remains before a watch needs winding.
#complications
The consistency of a watch's timekeeping rate across repeated measurements under the same conditions. A watch can run consistently fast or slow while still being precise.
#performance-and-ratings
Testing a watch case under controlled pressure or vacuum to check its sealing. The result reflects its condition at the time of the test rather than a permanent guarantee of water resistance.
#care-and-servicing
The documented history of a watch, including its ownership and origin. Supporting records can help establish its identity and historical significance.
#collecting-and-trade
A button on the watch case used to operate a function, such as starting a chronograph or adjusting a calendar.
#components
A thin surface coating deposited using physical vapor deposition. It can change a component's color and improve its resistance to wear.
#techniques
A battery-powered electronic movement that uses the vibrations of a quartz crystal to regulate timekeeping.
#movements
A strap with a built-in release mechanism, often a small lever on its spring bar. It allows removal and fitting without a separate strap-changing tool.
#straps-and-bracelets
A feature that lets the date be adjusted directly without moving the hands through a full day.
#functions-and-operation
A manufacturer's code identifying a watch model or configuration. It differs from a serial number, which identifies an individual watch.
#collecting-and-trade
Adjusting a watch movement's rate to reduce how much time it gains or loses.
#care-and-servicing
The inner wall or ring between the edge of the dial and the crystal. It may carry markings, engraving, or a polished finish.
#components
A bezel that turns to align its markings with the watch hands. Depending on its scale, it can track elapsed time, a countdown, or another time zone.
#components
A weight inside an automatic watch that turns with wrist motion. Its movement helps wind the mainspring.
#components
A watch cover made from synthetic sapphire, valued for its high scratch resistance. It can still chip or shatter under impact.
#materials
A crown that screws onto a threaded tube to help seal the case. It must be unscrewed before winding or setting the watch.
#components
A caseback that threads directly into the watch case and seals against a gasket. It differs from a back held in place by separate screws.
#components
A dial layout divided into distinct zones using concentric tracks and radial lines. Separate hour and minute scales often give it an instrument-like appearance.
#components
An identifying number assigned to an individual watch or movement. It can help trace production details and service records.
#collecting-and-trade
Maintenance that may include dismantling, cleaning, lubricating, and adjusting a movement. Worn parts and case seals may also be replaced.
#care-and-servicing
A watch's ability to withstand impacts without unacceptable damage or disruption to timekeeping. It does not make the watch immune to damage.
#performance-and-ratings
A watch with movement parts cut away to reveal more of its mechanism. An open dial or transparent case often makes the exposed structure visible.
#watch-types
A rotating bezel with a logarithmic scale that works against a second scale on the watch. It allows calculations such as multiplication, division, and unit conversion.
#components
A layout that displays running seconds on a separate subdial instead of using a central seconds hand.
#functions-and-operation
A light-powered movement, usually quartz, that converts light into electricity. The energy is stored in a rechargeable cell to keep the watch running in darkness.
#movements
A chronograph with two overlapping seconds hands that can time events starting together but ending separately. One hand can stop for a split reading while the other continues.
#complications
A broad watch category emphasizing durability and practical use during active pursuits. Features vary and may include water resistance, luminous markings, or timing functions.
#watch-types
A small tube with spring-loaded ends that commonly secures a strap or bracelet between the watch lugs.
#straps-and-bracelets
A corrosion-resistant iron alloy widely used for watch cases, bracelets, and clasps.
#materials
A smaller dial within the main watch dial, used to display information such as running seconds or elapsed minutes.
#components
A dial finished with fine lines radiating from a central point. The surface creates shifting bands of reflected light as the watch moves.
#techniques
A scale used with a chronograph to calculate average speed over a known distance. It converts elapsed seconds into units per hour.
#complications
A bezel bearing a tachymeter scale, usually fixed and paired with a chronograph. It converts the time taken to travel a known distance into average speed.
#components
A lightweight, corrosion-resistant metal used for watch cases and bracelets.
#materials
A rotating mechanism that houses the escapement and balance wheel, designed to reduce the effects of gravity-related positional errors.
#complications
A GMT watch with a local hour hand that can be adjusted independently, usually in one-hour steps. It lets travelers change local time while leaving the home-time indication undisturbed.
#functions-and-operation
A bezel that rotates in only one direction. On dive watches, it normally turns counterclockwise so an accidental movement indicates more elapsed time rather than less.
#components
A chronograph coupling that engages by pressing friction surfaces together along their axis. It transfers power to the chronograph mechanism when timing starts.
#components
A device that periodically rotates an automatic watch to help keep its mainspring wound while unworn. It is optional for most automatic watches.
#care-and-servicing
A rating indicating a watch's ability to withstand water exposure under specified testing conditions.
#performance-and-ratings
A function that displays the time across multiple time zones at once, often using a city ring and a 24-hour scale.
#complications