The Ultimate,
Beginner-Friendly
Watch Glossary

Categories

137 of 137 terms

  • 12-Hour Bezel

    A rotating bezel marked with a 12-hour scale. It can track a second time zone using the watch's regular hour hand.

    #components

  • Accuracy

    How closely a watch keeps time compared with a reference. It is often expressed as seconds gained or lost per day or month.

    #performance-and-ratings

  • Acrylic Crystal

    A watch cover made from transparent plastic. It scratches relatively easily, but light surface marks can often be polished away.

    #materials

  • Aftermarket Parts

    Replacement or accessory parts supplied by a third party rather than the watch's original manufacturer. They can affect originality, fit, and collector value.

    #collecting-and-trade

  • Amplitude

    The angle, measured in degrees, through which a balance wheel swings from its resting position to one extreme. Watchmakers use it to help assess movement condition.

    #performance-and-ratings

  • Analog Display

    A display that shows time using hands moving against a scale or dial. It can be powered by a mechanical or quartz movement.

    #functions-and-operation

  • Anglage

    The beveling and polishing of edges on movement parts, especially plates and bridges.

    #techniques

  • Annual Calendar

    A calendar complication that distinguishes between 30-day and 31-day months. It requires manual correction at the end of February.

    #complications

  • Anti-Reflective Coating

    A thin coating applied to one or both sides of a watch crystal to reduce reflections and improve dial visibility.

    #techniques

  • Applied Indices

    Separate hour markers attached to the dial rather than printed onto it. They add depth and may take the form of batons, numerals, or other shapes.

    #components

  • ATM

    Short for atmosphere, a pressure unit used in watch water-resistance ratings. A depth equivalent on a rating describes test pressure rather than a guaranteed usable diving depth.

    #performance-and-ratings

  • Automatic Movement

    A mechanical watch movement that winds itself using the natural motion of the wearer's wrist.

    #movements

  • Balance Wheel

    A rotating component that oscillates back and forth to regulate the timekeeping of a mechanical watch.

    #components

  • Bar

    A pressure unit commonly used to state water resistance. One bar is approximately atmospheric pressure at sea level and roughly the additional pressure from 10 meters of water.

    #performance-and-ratings

  • Barrel

    A cylindrical housing containing the mainspring. In most mechanical watches, its toothed edge drives the gear train as the spring unwinds.

    #components

  • Beat Rate

    The frequency at which a mechanical movement's balance oscillates, often expressed in vibrations per hour. Each vibration represents one half of a full oscillation.

    #performance-and-ratings

  • Bezel

    The ring surrounding a watch's crystal, which may be fixed or rotating and can serve various functions.

    #components

  • Bidirectional Bezel

    A bezel that rotates both clockwise and counterclockwise, allowing quick adjustment in either direction.

    #components

  • Bracelet

    A watch band made from connected links, commonly metal or ceramic. It is usually secured with a clasp and sized by adjusting or removing links.

    #straps-and-bracelets

  • Bridge

    A supporting part secured to the mainplate that holds movement components in position, often supporting the pivots of rotating wheels.

    #components

  • Brushing

    A surface-finishing technique that creates fine directional lines. It gives metal a softer, less reflective appearance than polishing.

    #techniques

  • Caliber

    The specific movement or mechanism that powers a watch, often identified by a manufacturer's reference number.

    #movements

  • Caller GMT

    A GMT watch with an independently adjustable 24-hour hand. It is convenient for tracking another time zone while keeping the main hands on local time.

    #functions-and-operation

  • Case

    The protective housing that holds the movement and dial. Together with the crystal, caseback, and seals, it helps protect the watch's interior.

    #components

  • Case Diameter

    The width of a watch case, usually measured across a round case in millimeters and excluding the crown. It is a common guide to watch size.

    #general-horology

  • Case Thickness

    The height of a watch from the caseback to the top of the crystal, usually measured in millimeters. It affects how high the watch sits on the wrist.

    #general-horology

  • Caseback

    The rear cover of a watch case. It may be solid or include a transparent window showing the movement.

    #components

  • Ceramic

    A hard, nonmetallic material used for components such as cases and bezel inserts. It resists scratches but can chip or fracture under impact.

    #materials

  • Chapter Ring

    A ring or marked band around the dial carrying a scale, often for hours, minutes, or seconds.

    #components

  • Chronograph

    A watch complication that functions as a stopwatch, allowing the measurement of elapsed time.

    #complications

  • Chronometer

    A watch or movement that has passed specific accuracy tests and received certification from an authorized testing body.

    #performance-and-ratings

  • Column Wheel

    A rotating component with raised columns that coordinates a chronograph's start, stop, and reset controls.

    #components

  • Complication

    Any function of a mechanical watch beyond displaying hours, minutes, and seconds, such as a date display or moon phase.

    #complications

  • Count-Up Bezel

    A rotating bezel with a scale that increases clockwise, commonly from zero to 60 minutes. Aligning its zero marker with the minute hand lets you read elapsed time.

    #components

  • Countdown Bezel

    A rotating bezel with a scale that decreases clockwise toward zero. Set the desired interval beside the minute hand to track the time remaining.

    #components

  • Crown

    A small knob on the side of a watch used to set the time, adjust functions, and wind the movement.

    #components

  • Crystal

    The transparent cover that protects the watch dial, typically made from sapphire, mineral glass, or acrylic.

    #components

  • Date Window

    An opening in the dial that shows the date of the month, usually from a numbered disc beneath it.

    #complications

  • Day-Date

    A calendar display that shows both the day of the week and the date of the month.

    #complications

  • Demagnetization

    The removal of unwanted magnetism from watch components using a demagnetizing device. Magnetized mechanical parts can disrupt timekeeping.

    #care-and-servicing

  • Deployant Clasp

    A folding clasp that opens to let a watch pass over the hand while keeping the strap or bracelet connected.

    #straps-and-bracelets

  • Dial

    The face of a watch that displays the time through hands, markers, numerals, or other indicators.

    #components

  • Digital Display

    A display that shows time directly as numerals rather than through the position of hands. It is usually electronic, though mechanical versions also exist.

    #functions-and-operation

  • Dive Watch

    A watch designed for underwater diving, with water resistance, a readable display, and a way to monitor dive time. A dive-style appearance alone does not establish diving suitability.

    #watch-types

  • DLC Coating

    A diamond-like carbon coating used to create a hard, wear-resistant surface on watch components. It commonly gives cases and bracelets a dark finish.

    #techniques

  • Dress Watch

    A watch designed to complement formal clothing, typically with a slim case and a restrained dial.

    #watch-types

  • Enamel Dial

    A dial decorated with a glass-like coating formed by firing powdered enamel onto a base, usually metal. Traditional fired enamel differs from paint or lacquer marketed with enamel-like descriptions.

    #techniques

  • End Link

    The part at either end of a bracelet that connects it to the watch case, often shaped to fit between the lugs.

    #straps-and-bracelets

  • Escapement

    A mechanism that controls the release of energy from the mainspring and regulates the movement of a mechanical watch.

    #components

  • Exhibition Caseback

    A caseback with a transparent window that lets the wearer see the movement. It is also called a display caseback.

    #components

  • Field Watch

    A practical, easy-to-read watch style rooted in military use, usually featuring clear numerals and a durable case.

    #watch-types

  • Fixed Bezel

    A bezel that does not rotate. It may be decorative or carry a scale, such as a tachymeter.

    #components

  • Fluted Bezel

    A bezel with a repeating pattern of ridges and grooves around its surface. The pattern is often used as a decorative design detail.

    #components

  • Flyback Chronograph

    A chronograph that can be reset and restarted instantly with a single push of a button while running.

    #complications

  • Full Set

    A watch offered with its original accompanying items, typically its box and papers. The exact contents vary, so the seller's inventory should specify what is included.

    #collecting-and-trade

  • Gasket

    A seal fitted around openings such as the caseback, crown, or crystal to help keep water and dust out.

    #components

  • Gear Train

    A series of meshing wheels and pinions that transmits motion through a watch movement.

    #components

  • GMT

    A watch function that displays a second time zone, typically using an additional hour hand.

    #complications

  • GMT Bezel

    A bezel marked with a 24-hour scale, read using a GMT hand. A rotating version can shift the displayed time zone without adjusting that hand.

    #components

  • Guilloché

    A decorative technique that creates intricate, repeating geometric patterns on watch dials and movement components.

    #techniques

  • Hacking Seconds

    A feature that stops the seconds hand when the crown is pulled out, allowing precise time synchronization.

    #functions-and-operation

  • Hairspring

    A fine spiral spring attached to the balance wheel. It provides the restoring force that keeps the wheel oscillating.

    #components

  • Hands

    Pointers that move over a dial to indicate time or other information, such as a second time zone or power reserve.

    #components

  • Horizontal Clutch

    A chronograph coupling that moves a wheel sideways into engagement with the chronograph train. It is also called a lateral clutch.

    #components

  • Horology

    The study and science of measuring time, including the art and craft of making clocks and watches.

    #general-horology

  • Hour Markers

    Numerals, dots, or other symbols that identify hour positions on a dial. They may be printed, applied, or coated with luminous material.

    #components

  • In-House Movement

    A movement described as developed and produced by the watch brand itself rather than sourced as a complete movement. The extent of outside sourcing varies between brands.

    #movements

  • Integrated Bracelet

    A bracelet designed to merge directly into a watch case through a model-specific connection. Fitting a conventional strap often requires a special adapter.

    #straps-and-bracelets

  • Internal Rotating Bezel

    A rotating timing ring beneath the crystal, typically operated by a separate crown.

    #components

  • Jewels

    Synthetic ruby or sapphire bearings used in watch movements to reduce friction and wear between moving components.

    #components

  • Jumping Hour Hand

    In travel-time watches, an hour hand that can be adjusted in one-hour steps without moving the minute hand. This differs from a jumping-hour display, which changes its hour indication instantly as time passes.

    #functions-and-operation

  • Lug Width

    The distance between the inside faces of a watch's lugs, usually measured in millimeters. It determines the strap or bracelet width needed at the attachment point.

    #straps-and-bracelets

  • Lug-to-Lug

    The distance from the tip of one lug to the opposite lug along the length of the case. It helps indicate how much wrist space a watch will occupy.

    #general-horology

  • Lugs

    The extensions of a watch case that connect the watch to its strap or bracelet.

    #components

  • Lume

    Luminous material applied to hands, markers, or other details to make them readable in darkness.

    #materials

  • Magnetic Resistance

    A watch's ability to withstand magnetic fields while limiting their effect on timekeeping. Protection may come from shielding or components made from materials less affected by magnetism.

    #performance-and-ratings

  • Mainplate

    The principal supporting plate of a watch movement. It holds many components in position and provides mounting points for bridges.

    #components

  • Mainspring

    A tightly coiled spring that stores and releases the energy needed to power a mechanical watch.

    #components

  • Manual Winding

    A mechanical movement system that relies on turning the crown by hand to wind the mainspring.

    #movements

  • Manufacture

    In watchmaking, a company that produces its own movements rather than simply casing purchased movements. It may still source some components from specialist suppliers.

    #general-horology

  • Mechanical Movement

    A movement powered by a mainspring and regulated by a mechanical oscillator, typically a balance wheel and hairspring. It can be manually wound or automatic.

    #movements

  • Micro-Rotor

    A small automatic winding weight recessed into the movement rather than sitting above it. This arrangement can help reduce movement thickness.

    #components

  • Microadjustment

    A feature that changes a bracelet's fit in small increments without removing links. Depending on the clasp, adjustment may require a tool or be possible by hand.

    #straps-and-bracelets

  • Mineral Crystal

    A watch cover made from mineral glass, often hardened for durability. It generally resists scratches better than acrylic but less well than sapphire.

    #materials

  • Minute Repeater

    A complication that sounds the time on demand using small hammers and gongs. It typically chimes the hours, quarter-hours, and remaining minutes.

    #complications

  • Moonphase

    A watch complication that displays the current phase of the Moon as it progresses through its lunar cycle.

    #complications

  • Movement Finishing

    The surface treatments and final detailing applied to movement parts. These can serve practical purposes, such as removing burrs, as well as decorative ones.

    #techniques

  • New Old Stock (NOS)

    Older stock described as unused and left unsold since its original retail period. An unworn watch can still show storage wear or need servicing because of its age.

    #collecting-and-trade

  • Open-Heart Dial

    A dial with an opening that reveals part of the movement, usually the oscillating balance wheel. Most of the movement remains covered, unlike a fully skeletonized design.

    #components

  • Patina

    Changes in a watch's color or surface appearance that develop with age and exposure. Patina can be desirable to collectors, but it does not by itself establish originality or good condition.

    #collecting-and-trade

  • Perlage

    A decorative finish formed from overlapping circular marks, often applied to movement plates and bridges.

    #techniques

  • Perpetual Calendar

    A calendar complication that automatically accounts for varying month lengths and leap years, typically until a specified calendar exception.

    #complications

  • Pilot Watch

    A watch designed for aviation use or inspired by aviation instruments. Common features include a highly legible dial and controls that are easy to operate.

    #watch-types

  • Pin Buckle

    A strap fastener with a hinged pin that passes through a sizing hole. It works like a traditional belt buckle.

    #straps-and-bracelets

  • Pocket Watch

    A watch designed to be carried in a pocket rather than worn on the wrist, often attached to a chain.

    #watch-types

  • Power Reserve

    The amount of time a mechanical watch can continue running before its stored energy is exhausted.

    #performance-and-ratings

  • Power Reserve Indicator

    A display showing how much running time or stored energy remains before a watch needs winding.

    #complications

  • Precision

    The consistency of a watch's timekeeping rate across repeated measurements under the same conditions. A watch can run consistently fast or slow while still being precise.

    #performance-and-ratings

  • Pressure Testing

    Testing a watch case under controlled pressure or vacuum to check its sealing. The result reflects its condition at the time of the test rather than a permanent guarantee of water resistance.

    #care-and-servicing

  • Provenance

    The documented history of a watch, including its ownership and origin. Supporting records can help establish its identity and historical significance.

    #collecting-and-trade

  • Pusher

    A button on the watch case used to operate a function, such as starting a chronograph or adjusting a calendar.

    #components

  • PVD Coating

    A thin surface coating deposited using physical vapor deposition. It can change a component's color and improve its resistance to wear.

    #techniques

  • Quartz Movement

    A battery-powered electronic movement that uses the vibrations of a quartz crystal to regulate timekeeping.

    #movements

  • Quick-Release Strap

    A strap with a built-in release mechanism, often a small lever on its spring bar. It allows removal and fitting without a separate strap-changing tool.

    #straps-and-bracelets

  • Quickset Date

    A feature that lets the date be adjusted directly without moving the hands through a full day.

    #functions-and-operation

  • Reference Number

    A manufacturer's code identifying a watch model or configuration. It differs from a serial number, which identifies an individual watch.

    #collecting-and-trade

  • Regulation

    Adjusting a watch movement's rate to reduce how much time it gains or loses.

    #care-and-servicing

  • Rehaut

    The inner wall or ring between the edge of the dial and the crystal. It may carry markings, engraving, or a polished finish.

    #components

  • Rotating Bezel

    A bezel that turns to align its markings with the watch hands. Depending on its scale, it can track elapsed time, a countdown, or another time zone.

    #components

  • Rotor

    A weight inside an automatic watch that turns with wrist motion. Its movement helps wind the mainspring.

    #components

  • Sapphire Crystal

    A watch cover made from synthetic sapphire, valued for its high scratch resistance. It can still chip or shatter under impact.

    #materials

  • Screw-Down Crown

    A crown that screws onto a threaded tube to help seal the case. It must be unscrewed before winding or setting the watch.

    #components

  • Screw-In Caseback

    A caseback that threads directly into the watch case and seals against a gasket. It differs from a back held in place by separate screws.

    #components

  • Sector Dial

    A dial layout divided into distinct zones using concentric tracks and radial lines. Separate hour and minute scales often give it an instrument-like appearance.

    #components

  • Serial Number

    An identifying number assigned to an individual watch or movement. It can help trace production details and service records.

    #collecting-and-trade

  • Servicing

    Maintenance that may include dismantling, cleaning, lubricating, and adjusting a movement. Worn parts and case seals may also be replaced.

    #care-and-servicing

  • Shock Resistance

    A watch's ability to withstand impacts without unacceptable damage or disruption to timekeeping. It does not make the watch immune to damage.

    #performance-and-ratings

  • Skeleton Watch

    A watch with movement parts cut away to reveal more of its mechanism. An open dial or transparent case often makes the exposed structure visible.

    #watch-types

  • Slide Rule Bezel

    A rotating bezel with a logarithmic scale that works against a second scale on the watch. It allows calculations such as multiplication, division, and unit conversion.

    #components

  • Small Seconds

    A layout that displays running seconds on a separate subdial instead of using a central seconds hand.

    #functions-and-operation

  • Solar Movement

    A light-powered movement, usually quartz, that converts light into electricity. The energy is stored in a rechargeable cell to keep the watch running in darkness.

    #movements

  • Split-Seconds Chronograph

    A chronograph with two overlapping seconds hands that can time events starting together but ending separately. One hand can stop for a split reading while the other continues.

    #complications

  • Sports Watch

    A broad watch category emphasizing durability and practical use during active pursuits. Features vary and may include water resistance, luminous markings, or timing functions.

    #watch-types

  • Spring Bar

    A small tube with spring-loaded ends that commonly secures a strap or bracelet between the watch lugs.

    #straps-and-bracelets

  • Stainless Steel

    A corrosion-resistant iron alloy widely used for watch cases, bracelets, and clasps.

    #materials

  • Subdial

    A smaller dial within the main watch dial, used to display information such as running seconds or elapsed minutes.

    #components

  • Sunburst Dial

    A dial finished with fine lines radiating from a central point. The surface creates shifting bands of reflected light as the watch moves.

    #techniques

  • Tachymeter

    A scale used with a chronograph to calculate average speed over a known distance. It converts elapsed seconds into units per hour.

    #complications

  • Tachymeter Bezel

    A bezel bearing a tachymeter scale, usually fixed and paired with a chronograph. It converts the time taken to travel a known distance into average speed.

    #components

  • Titanium

    A lightweight, corrosion-resistant metal used for watch cases and bracelets.

    #materials

  • Tourbillon

    A rotating mechanism that houses the escapement and balance wheel, designed to reduce the effects of gravity-related positional errors.

    #complications

  • Traveler GMT

    A GMT watch with a local hour hand that can be adjusted independently, usually in one-hour steps. It lets travelers change local time while leaving the home-time indication undisturbed.

    #functions-and-operation

  • Unidirectional Bezel

    A bezel that rotates in only one direction. On dive watches, it normally turns counterclockwise so an accidental movement indicates more elapsed time rather than less.

    #components

  • Vertical Clutch

    A chronograph coupling that engages by pressing friction surfaces together along their axis. It transfers power to the chronograph mechanism when timing starts.

    #components

  • Watch Winder

    A device that periodically rotates an automatic watch to help keep its mainspring wound while unworn. It is optional for most automatic watches.

    #care-and-servicing

  • Water Resistance

    A rating indicating a watch's ability to withstand water exposure under specified testing conditions.

    #performance-and-ratings

  • World Time

    A function that displays the time across multiple time zones at once, often using a city ring and a 24-hour scale.

    #complications